EN 81-1/2
These energy-storing lift buffers may only be used in lifts in operation within the EU as a replacement part of an original safety component. This is only possible if no lift buffer can be used according to the current state of the art. No EU declaration of conformity can be provided. A CE marking is not appropriate!
Filter
Products on this page: 24
Lift buffer T4/Type B, ø 165 x 80 mm, with plastic bush, according to EN 81-1/2 without CE mark
**Note:
This lift buffer may be used in elevators operating within the EU only as a spare part of...
Suitable for manufacturer: P+S
Item number:
321004
Lift buffer T3/Type B, ø 125 x 80 mm, with plastic bush, according to EN 81-1/2 without CE mark
**Note:
This lift buffer may be used in elevators operating within the EU only as a spare part of...
Suitable for manufacturer: P+S
Item number:
321003
Lift buffer T1/Type A, ø 80 x 80 mm, with plastic bush, according to EN 81-1/2 without CE mark
**Note:
This lift buffer may be used in elevators operating within the EU only as a spare part of ...
Suitable for manufacturer: P+S
Item number:
321001
Lift buffer EN7, ø 125 x 200 mm, with oval steel plate, according to EN 81-1/2, without CE mark
**Note:
This lift buffer may be used in elevators operating within the EU only as a spare part of...
Suitable for manufacturer: ETN
Item number:
320207-T
Lift buffer T5/Type C, ø 220 x 80 mm, with square steel plate, according to EN 81-1/2 without CE mark
**Note:
This lift buffer may be used in elevators operating within the EU only as a spare p...
Suitable for manufacturer: P+S
Item number:
323005
Lift buffer EN2, ø 100 x 80 mm, with square steel plate, according to EN 81-1/2, without CE mark
**Note:
This lift buffer may be used in elevators operating within the EU only as a spare part o...
Suitable for manufacturer: ETN
Item number:
320202-Q
Lift buffer E12/Type A, ø 140 x 110 mm, with round steel plate, according to EN 81-1/2 without CE mark
**Note:
This lift buffer may be used in elevators operating within the EU only as a spare ...
Suitable for manufacturer: P+S
Item number:
320025
Lift buffer EN5, ø 125 x 150 mm, with square steel plate, according to EN 81-1 / 2, without CE mark
**Note:
This lift buffer may be used in elevators operating within the EU only as a spare par...
Suitable for manufacturer: ETN
Item number:
320205-Q
Lift buffer EN4, ø 165 x 80 mm, with square steel plate, according to EN 81-1 / 2, without CE mark
**Note:
This lift buffer may be used in elevators operating within the EU only as a spare part...
Suitable for manufacturer: ETN
Item number:
320204-Q
Lift buffer E6/Type A, ø 140 x 200 mm, with oval aluminium plate, according to EN 81-1/2 without CE mark
**Note:
This lift buffer may be used in elevators operating within the EU only as a spar...
Suitable for manufacturer: Thyssenkrupp
Item number:
320032
Lift buffer E12/Type A, ø 140 x 110 mm, with oval aluminium plate, according to EN 81-1/2 without CE mark
**Note:
This lift buffer may be used in elevators operating within the EU only as a spa...
Suitable for manufacturer: Thyssenkrupp
Item number:
320031
Lift buffer E13/Type B, ø 140 x 160 mm, with plastic bush, according to EN 81-1/2 without CE mark
**Note:
This lift buffer may be used in elevators operating within the EU only as a spare part ...
Suitable for manufacturer: P+S
Item number:
321021
Lift buffer E8/Type B, ø 165 x 220 mm, with plastic bush, according to EN 81-1/2 without CE mark
**Note:
This lift buffer may be used in elevators operating within the EU only as a spare part o...
Suitable for manufacturer: P+S
Item number:
321016
Lift buffer E5/Type B, ø 140 x 100 mm, with plastic bush, according to EN 81-1/2 without CE mark
**Note:
This lift buffer may be used in elevators operating within the EU only as a spare part o...
Suitable for manufacturer: P+S
Item number:
321013
Lift buffer T10/E9/Type B, ø 220 x 160 mm, with plastic bush, according to EN 81-1/2 without CE mark
**Note:
This lift buffer may be used in elevators operating within the EU only as a spare pa...
Suitable for manufacturer: P+S
Item number:
321009
Lift buffer T9/E7/Type B, ø 165 x 160 mm, with plastic bush, according to EN 81-1/2 without CE mark
**Note:
This lift buffer may be used in elevators operating within the EU only as a spare par...
Suitable for manufacturer: P+S
Item number:
321008
Lift buffer T6/E1/Type B, ø 100 x 160 mm, with plastic bush, according to EN 81-1/2 without CE mark
**Note:
This lift buffer may be used in elevators operating within the EU only as a spare par...
Suitable for manufacturer: P+S
Item number:
321006
Lift buffer T5/Type B, ø 220 x 80 mm, with plastic bush, according to EN 81-1/2 without CE mark
**Note:
This lift buffer may be used in elevators operating within the EU only as a spare part of...
Suitable for manufacturer: P+S
Item number:
321005
Lift buffer EN3, ø 125 x 80 mm, with oval steel plate, according to EN 81-1/2, without CE mark
**Note:
This lift buffer may be used in elevators operating within the EU only as a spare part of ...
Suitable for manufacturer: ETN
Item number:
320203-T
Lift buffer E13/Type A, ø 140 x 160 mm, with round steel plate, according to EN 81-1/2 without CE mark
**Note:
This lift buffer may be used in elevators operating within the EU only as a spare ...
Suitable for manufacturer: P+S
Item number:
320021
Lift buffer E10/Type A, ø 220 x 220 mm, with round steel plate, according to EN 81-1/2 without CE mark
**Note:
This lift buffer may be used in elevators operating within the EU only as a spare ...
Suitable for manufacturer: P+S
Item number:
320011
Lift buffer E6/Type B, ø 140 x 200 mm, with plastic bush, according to EN 81-1/2 without CE mark
**Note:
This lift buffer may be used in elevators operating within the EU only as a spare part o...
Suitable for manufacturer: P+S
Item number:
321014
Lift buffer T7/E4/Type B, ø 125 x 200 mm, with plastic bush, according to EN 81-1/2 without CE mark
**Note:
This lift buffer may be used in elevators operating within the EU only as a spare par...
Suitable for manufacturer: P+S
Item number:
321012
Lift buffer E2/Type B, ø 125 x 100 mm, with plastic bush, according to EN 81-1/2 without CE mark
**Note:
This lift buffer may be used in elevators operating within the EU only as a spare part o...
Suitable for manufacturer: P+S
Item number:
321011